Active PJ Bass Pickup Set
Click To Enlarge

Dragonfire ACTIVE PJ BASS Pickup Set
1 Active Jazz Bass Bridge Pickup + 1 P Bass Split Precision Active Pickup Set
Brand New Matched 4 String PJ-Bass Pickup Active Precision Set

Blend the benefits of the Jazz Bass Pickup with the P Bass Split Pickup for another level of playing. Layer your style and explore the sound possibilities provided by this marriage of two great bass pickup playing flavors.

The Dragonfire PJ Bass Pickups in this Active PJ Set provide hot active output and clarity with the sound isolating and low interference performance typically associated with an active pickup. Featuring ceramic magnets, better balance, increased sustain and output across the strings, these Active PJ Pickups are a must-have for the serious player. Better performance maintenance regardless of volume level along with reduced overtone and balanced signal conversion make these pups stand out in the crowd. If you want less hum, more snap, clean signal and sharpness, look no further! The PJ Bass Noiseless Dragonfire Pickup Set excels in the low to midrange while still allowing for high end response, freer vibration, and low-end thump, adding nice dimension to your playing. These are great for big, substantial playing styles with the thickness and thump you need in most styles of bass play.

The J Bass bridge pickup in this set comes wired with a colored (hot) wire, black (ground) wire, and battery wire. The precision pickups are single-coil split for two distinct pickups wound opposite from each other and come wired with a white (hot) wire and bare (ground) wire plus a battery wire and black pickup connection wire (roughly 6” in length). This design allows for more even tonal capability and balanced sound along with reduced hum. The eight-pole design on the single-coil J Bass Pickup and Split P Bass Pickups (4 each split) will work for your fretted or fretless 4-string bass. Wax potting on the coils and an epoxy seal on the pickups help isolate sound, increase noise suppression, and reduce feedback as well as or other undesirable output. This matched set is collaborative and the pickups will work in conjunction with one another for best possible performance.

The cover dimensions for the P Bass pickups are a bit larger than US standard sizing. If you are direct-mounting, there is generally no problem. If you are using a guard, some pickguard modification may be required for proper fit. Bass pickup dimensions have varied over time so be sure to check your cavity and available space with the approximate measurements for these pickups (provided below).

*Brand New Set of PJ-Bass Active Split Pickups
*Works with 4-String Bass Guitars
*Ceramic Magnet Style
*Wax Potted Pickup Components
*Epoxy Sealed Pickups
*These are ACTIVE pickups and require a 9v battery (not included)
*Noiseless (Please note that noise and interference can come from many sources other than your pickup!)
*Adhesive Backing on Pickup Pad (for easier installation; one side of each pad)
*Mounting Screw Head Type: Phillips Pan Style Head (not counter-sunk)
*Larger Style P-Bass Pickup Covers (not typically a problem for direct mounting)

*Jazz Bass Bridge Pickup Dimensions
-Overall Pickup Length: 94.6mm
-Overall Pickup Width: 28.9mm (18.6mm excluding screw flanges)
-Overall Pickup Depth/Height: 22.8mm
-Bridge Pickup Screw Flange Spacing (center:center): N:S 24.2mm & E:W 40.4mm
*P Bass Split Pickup Dimensions
-Overall Pickup Length: 72mm (57mm excluding screw flanges)
-Overall Pickup Width: 27.8mm
-Overall Pickup Depth/Height: 14.4mm
-Pickup Screw Flange Spacing (center:center): 65mm
*P Bass Pickup Pad Measurements: 39.5mm x 18.2mm x 13.5mm
*J Bass Pickup Pad Measurements: 64mm x 14mm x 13mm
*Overall Screw Length: 37.5mm
*Screw Head Diameter: 4.2mm
Measurements provided are approximations; variability is to be expected.

*1 Jazz Bass Bridge Pickup
*1 P Bass Split Pickup Set
*3 Foam Pickup Pads
*8 Pickup Mounting Screws (your choice of color)
*3 25K Pots
*1 Battery Clip
*1 Jack
*1 .1 Tone Cap
*BASIC Wire Color Codes
Nothing else is included. Supplementary images may be provided for additional reference and comparison purposes only.

Basic wire color codes will let you know which wires are hot and which are grounds as well as the most basic of connections. Due to the vast and varied nature of possible set-ups, we do not provide specific information or diagrams for installation. You should be able to use the simple information we provide to match up with any diagram or instructions you choose to use. Detailed instructions for installation are NOT included. You should be able to use basic knowledge of wiring with the diagram or instructions of your choice. Installation requires soldering. We do not provide technical or any other type of support for installation, configuration, modification, or use of this item. Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage. Do not purchase if you are unsure of your ability to successfully complete installation.

ALLOW & EXPECT variation in color due to photo and monitor settings as well as natural product variance.

CONTACT US PRIOR TO PURCHASE if you have any questions or concerns regarding color, pattern, fit, materials, installation requirements, compatibility with your instrument, measurements provided, or anything else.

  • Item #: 2790

ACTIVE PJ Bass Pickup Set, Jazz Bridge + Split P, 4 String Bass

Price: $69.95
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review