Pure Tone Guitar or Bass MONO JACK
Including Prewired Lead / Pre-Soldered Wire
Open Frame Style, Input / Output Jack
MONO JACK, Choice of Washer & Nut Colors
Includes Extra Nut for Height Adjustment
Lead Wire w/ Insulated Connections ~ Hot & Ground
Choice of Wire Type & Length
~~Item Description~~
This two-pin, four-connector mono jack will work with standard guitar cables and is specifically designed by Pure Tone to increase the connection security for your cable. Enhanced cord attachment stability and improved overall performance are just some of the benefits you’ll experience with this jack. We find that their design addresses intermittent drop-offs, crackle and pop so you can better enjoy your play without constantly readjusting your cord or worrying about sound spikes or cut-outs common with some jacks. With this item, we offer the option to include your choice of pre-connected wire lead styles and lengths to speed your PureTone jack installation, giving you one hot (colored wire) and one ground (black wire) pre-soldered lead with insulated connections for your convenience.
Please check your needs carefully for compatibility with this item. If you have an import or other non-standard instrument, this item may not work for your set-up or you may have to enlarge your opening for installation. Jacks of this style are tightened onto the jack plate (available separately); this jack may not work with some import jackplates.
~~Product Information~~
*Pure Tone Brand Jack
*Excellent Connection Stability
*Superior Jack Performance
*2 Pin Conductor Design (1 Hot & 1 Ground)
*4-Point Connection Style for Enhanced Stability
*Single Channel Mono Jack Style
*Accepts 1/4” Plug
*Pre-Installed Washer (1) & Nuts (2)
*Choice of Standard or Cloth Covered Wire Styles
*Choice of Wire Length & Gauge
*Insulated Wire Connections
~~Approximate Measurements~~
*Overall Length: 15mm (without pins) & 28mm (incl. pins)
*Thread Length: 9.75mm
*Overall Diameter (Mounting Hole Required): 9.5mm
*Mounting Nut Diameter: 9mm (inner) 12.5mm (outer)
*Washer Diameter: 9mm (inner) & 15mm (outer)
*Wire Length: As Selected 6” 8” or 10”
~~What’s Included~~
*1 Pure Tone Jack
*1 Standard Flat Washer (Choice of Color)
*1 Hex Mounting Nut (Choice of Color)
*1 Bonus/Extra Hex Mounting Nut (Standard Color)
*Wire Lead (1 Hot & 1 Ground)
~~Purchase Notes~~
Please check your instrument and set-up needs carefully to see if this item will work for you.
Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.
Due to the vast and varied nature of possible set-ups, we do not provide specific information or diagrams for installation. Installation requires soldering. Depending on your current or desired set-up, installation may require extra care, accuracy, or advanced skill. You should be able to use knowledge of wiring and/or your own diagram/instructions/experience to install. Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage. These items install best with moderate heat only (don’t have your iron too hot); pay attention during install to avoid damage. We do not provide technical or any other type of support for installation, configuration, modification, or use of this item. Do not purchase if you are unsure of your ability to successfully complete installation.
ALLOW & EXPECT variation in color due to photo and monitor settings as well as natural product variance. Color, sound, performance or other descriptions are subjective as well as generic in nature. Color descriptions indicate color only, not material. Due to the production/machining process, some natural variation and imperfection may be expected in the finish of this item.
Inspect your order upon receipt for any shipping damage, fit, and general appearance. DO NOT use, modify or install the product if anything does not meet with your approval for any reason. Message us right away; we pledge to address any problems or concerns you have PRIOR to installation. If everything is in order, install carefully to enjoy.
- Style: Pure Tone Guitar or Bass MONO JACK, Excellent Performance Capacity
- Color: Choice of Washer / Nut Colors
- Fit: Open Frame Style, Input / Output Jack, Includes Extra Nut for Height Adjustment
- Featuring: Pre-Soldered Lead Wire w/ Insulated Connections ~ Hot & Ground Prewired
- Type: Choice of Wire Style / Length
- Attribute: Two-Pin, Four-Connector Jack ft. Enhanced Connection Stability
- Item #: 10203