Dragonfire Prewired Strat HH (Double Humbucker) Strat Loaded Pickguard Featuring Vintage Buckers, Choice of Colors, Styles & Wiring, an excellent choice for Classic LP tone with a bit more bite
Click To Enlarge

Prewired / Loaded HH Pickguard
Dragonfire Vintage Buckers Guard
Double Humbucker Loaded Wired Guard

Choice of Colors, Styles & Wiring Options
Custom Built to Order Prewired Guard with Dragonfire A5 Vintage Bucker Humbucker Pickups

The Dragonfire A5 Vintage Buckers featured in this guard are hot wound passive pickups offering warm and clear humbucker performance. The Vintage Buckers boast an AlNiCo 5 magnet style and can provide you with smooth, strong bass and highs. For everything from Blues to Classic Rock, these humbuckers are an excellent choice for Classic LP tone with a bit more bite.

~~Build & Guard Details~~
*Brand New Customized Prewired Pickguard
*Fender® Replacement Guard
*Standard USA & MEX/MIM 2002 & Newer Style Fit
*Protective Film Surface Cover (remove after install)
*Alnico 5 / Alnico V (A5 / AV) Pickup Magnet Style
*4 Wire Pickups, Coil Split Capable
*Wound to ~16.9K (Bridge) & ~8.3K (Neck)
*Aluminum Shielded Electronics Area (shape/color may vary)
*See Guard Color Samples HERE
*Full-Size 500K Pots (large/long unless your other selections require a different style)
*Sealed Style Switch Comes Standard

~~Selection Options~~
This build is available in many colors/styles with a variety of personalization and upgrade options. These are not cookie-cutter mass-produced generic creations. All wiring is done in house, customized just for you to create your ideal guard. We know players’ needs are varied and unique. Your selections and any addition of effects or upgrades will determine ultimate layout and functionality and may necessitate, at our discretion, substitution of component styles depending on options chosen. Wiring upgrade option information can be found on our store’s Prewired landing page. Onboard effects and circuit information can be found here. Contact us if you have any questions about the options available for this build.

~~Installation Information~~
No diagrams are included. Your loaded guard will come with three open wires. Red is hot and is soldered to the tip of your jack. If you select a jack, this will be pre-done for you so you’ll unsolder, feed the wires through your channel, and resolder. Jacks work with standard cables only and jack sockets accept standard ¼” plugs. Both blacks are grounds. One is soldered to the jack sleeve and the other is grounded to your trem/bridge. If your selections require alternate installation, additional instructions will be included in your shipment.

Take your time for installation; do not use power tools and do not over-tighten screws or other components. If you are unsure of your ability to successfully install this item, please do not purchase.

~~Purchase Notes~~
Please check your instrument and set-up needs carefully to see if this item will work for you.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.

These guards will not fit anything other than specifically noted compatible models. They will not work with non-standard components or systems. Guards are not guaranteed to fit “Squiers” and will not fit “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “Fender® Standard” model guitars in the years and configuration noted. Non-standard selections may require body modifications. Your selections are your own – we will create your guard to order per your specifications so please know your needs prior to purchase.

Depending on your set-up, you may require adjustment. Ask in advance and we are happy to provide fit/compatibility information or make special arrangements if possible. Do not buy if you are unsure of your requirements, needs, or ability to make any required adjustments.

Allow and expect variation in color due to photo and monitor settings as well as natural product variance. Color, sound, performance or other descriptions are subjective as well as generic in nature. Your outcome will vary based on many factors, most importantly your own skill, style, and experience. Color descriptions indicate color only, not material. We do not recommend purchasing if you are looking for a particular outcome or are trying to match an existing color/theme on your guitar.

  • Style: Prewired / Loaded HH Pickguard
  • Pickguard: Double Humbucker Wired Guard
  • Pickup Style: 4 Wire Humbuckers, Hot Wound Vintage Alnico
  • Color: Choice of Colors for Guard, Pickups & Knobs
  • Fit: USA / MEX 2002 & Newer Fender Standard 11 Hole Mounting
  • Featuring: Dragonfire Vintage Buckers Humbucker Bridge & Neck
  • Type: Choice of Wiring, Effects & Upgrades
  • Item #: 10198

Prewired HH Pickguard, Loaded Vintage Buckers Double Humbucker

Price: $99.95
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review