SoCal HS Floyd Rose CUSTOM
Click To Enlarge


Charvel Style HS (Humbucker-Single) SoCal Guard
CUSTOM Style (choice of volume & switch holes)
Brand New Stratocaster FR Guard, Fits Fender


This Humbucker Single (H-S) Stratocaster Floyd Rose (F.R.) Pickguard is cut for one humbucker at the bridge and a single coil at the neck. It features a shielded electronics area. Our Hum Sin Floyd Rose So-Cal Guard has an 11-hole mounting pattern to fit U.S.A. Fender FLOYD ROSE Strats and MIM (Made in Mexico) 2002 & newer FLOYD ROSE Strats. Floyd Rose Cut pickguards are designed for a Floyd Cut FR Tremolo rather than a Standard Strat set-up. Floyd Rose Style Tremolos require a larger cut-out/different guard shape. Floyd Rose guards will not fit a guitar with a standard-sized trem.


  • Brand new HS FLOYD ROSE pickguard
  • Fender replacement guard
  • 11 hole FR mounting pattern
  • Counter-sunk mounting screw holes
  • Fits American (US) Fender FLOYD ROSE Strats
  • Fits Mexican (MX) FLOYD ROSE Strats 2002 & newer
  • Aluminum shielded electronics area
  • Rounded-corner pickup mounting holes
  • 2 pickup mounting screw holes per opening
  • Protective layer of film covering face of guard

This pickguard is the SoCal CUSTOM Style of guard and allows personalization for your unique style offered by no one else! Our Custom offering stays true to the tradition of the So Cal Classic with a single volume hole but with special customization options for your new guard. We offer the added bonus of pot position options as well as your choice of switch hole styles for increased personalization and playability. Just tell us how you would like your new pickguard sent to you and we are happy to accommodate your preferences. Please check out the provided reference image for hole options. Please be aware that mirror guards may be difficult to drill or cut successfully on your own; this option is not recommended for those without experience.

SoCal CUSTOM Options
Your choice of switch option guard drilling (choose one of the following options):

  • None (left blank for you to drill or cut as you choose)
  • 1 Switch Hole for 3 Way Toggle Style Switch drilled in Position 2.5
  • 2 Mini Switch Holes drilled for you as shown in the provided reference image

Your choice of a single pot hole as follows (choose one of the following options):

  • P0 – Position #0 – NO Hole (undrilled – you drill where you like)
  • P1 – Position #1 – Standard Strat Volume Hole
  • P1.5 – Position #1.5 – Slight Offset between Position #1 and Position #2
  • P2 – Position #2 – Standard Strat Middle Tone
  • P3 – Position #3 – Standard Strat Bottom Tone
  • P4 – Position #4 – Offset (may require extra routing)

IMPORTANT NOTES regarding hole placement options. Thank you for your attention to these important details.

  • Position #4 may not fit in a Standard Strat route on some models and additional routing may be required with this selection.
  • Mirror guards may be more difficult to drill successfully; these may require extra skill and patience. Drilling mirror guards is not recommended for novices.
  • Hole Placement - Be aware of your knob circumference and hole placement as some hole options are too close together to allow adjacent standard size pot placement. Your choices for hole positions are your own and not our responsibility. We have no knowledge or control over the knobs you choose to install. Please think ahead! If you are unsure, the safest option would be to go with SoCal Classic styling (single volume hole in Position 4 as well as the 3-way toggle switch hole in Position 2.5).
  • You can use a full-size or mini-size volume pot with any choice of pot hole.

What’s Included

  • 1 Strat H.S. (Humbucker-Single) FLOYD ROSE Pickguard

Nothing else is included. Any extra images are provided for additional reference and comparison purposes only. There are no diagrams or instructions provided with this item. We do not provide technical or any other type of support for installation, configuration, or use of this item.

This pickguard will not fit guitars or styles other than specified and will not work with specialty sized pickups. It WILL NOT FIT a “Squier” “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “FENDER STANDARD” model guitars in the years and configuration specified above. It will not work with covered or active humbuckers.


Color descriptions in titles and product descriptions represent COLORS only, not material. Please allow and expect variation in color due to photo and monitor settings as well as natural product variance.

Be sure to inspect your order carefully upon receipt for any shipping damage, fit on your guitar, color, and general appearance. Your new pick guard will be shipped to you with a layer of protective film covering the guard surface. DO NOT remove the protective film, modify or install the guard if it does not meet with your approval for any reason. We pledge to address any problems or concerns you have prior to installation.

If everything is in order upon receipt, simply install carefully and then slowly peel off the protective covering to enjoy. Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage; this is especially true with mirror guards. 

  • Item #: 10289

SoCal HS Strat FLOYD ROSE Guard, Charvel Style, SO-CAL FR CUSTOM

Price: $20.95
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review